Concrete cutting in Lake Forest CA - clean cuts planned around what's in the slab
Need an opening in a slab, wall or floor? We scan first, bring the right saw and leave a straight, clean edge.
Complete Lake Forest Concrete Company is a concrete contractor in Lake Forest. We're best known for driveways, patios and walks that drain the way they should, and we also take on slabs that have started to move. Our concrete cutting in Lake Forest gets the same approach. We explain the job before we price it, then do it the careful way.
- Owner visits and writes your estimate
- In business since 2017
- Fully licensed and insured
Concrete cutting in Lake Forest, planned before the saw starts
Concrete cutting means sawing through a slab, wall or floor that's already in place, so a doorway, a plumbing trench or a worn-out section can come out clean. Homeowners usually call us when they're adding on, running new lines under the house, or clearing old concrete ahead of a new driveway or concrete patio. We scan the slab first, because what's inside it doesn't always match the drawings.
Price mostly turns on how long the cut is, how thick the concrete is and whether rebar, the steel bars set inside a slab to hold it together, runs through it, since steel and depth slow the blade. The schedule turns on where the cut is and, inside a house, on having power ready for the saw. Your estimate puts a number on your cut.
- Scanning first. We scan the slab before the saw starts, so we know where the steel, pipes and wires sit.
- Picking the saw. Flat saws handle floors and driveways, wall saws handle upright and sloped faces, and the shape of the cut decides which one we bring.
- Indoor cuts. Inside an occupied home we use an electric saw, because gas or diesel exhaust has nowhere to go.
- Breaking out. Once the cut is done, we break the section into pieces we can carry and haul it off.
What we cut and where
Most cutting jobs on homes and small properties fall into a few kinds, and each one calls for a different saw, so here's the range we see.
Slab and flatwork cuts
We saw through driveways, patios and walks, the flat concrete the trade calls flatwork, to take out a damaged panel or make room for something new.
Doorways in walls
A wall saw cuts doorways and window openings in concrete walls, working on upright and sloped faces where a flat saw can't sit.
Trenches for plumbing
We cut narrow trenches through a house or garage slab so new drain or water lines can run underneath, then fill them back with concrete.
Thick or odd-shaped cuts
A wire saw handles mass concrete and odd shapes, and a chain saw makes plunge cuts with square corners a round blade can't reach.
If you need something cut that isn't on this list, call and describe it, and we'll talk through whether it's work we take on.
Why careful concrete cutting pays off later
A careful cut leaves a straight, solid edge for whatever comes next and leaves the concrete around it sound. A rushed one leaves chipped edges and damage you end up paying to fix later.
- Clean, square edgesA saw leaves a straight face that a new pour or a door frame can sit tight against, where a hammer leaves chips.
- Steel and lines locatedGuessing where the rebar and wires run works right up until it doesn't, which is why the scan comes first.
- Only what has to goCutting just the section you need leaves the rest of the slab whole, instead of breaking out more than the job calls for.
- Clean air indoorsAn electric saw keeps exhaust out of the house, so you aren't airing out fumes after we pack up.
How a cutting job runs
Call or send the form
Tell us what needs cutting and where, and we'll get back to you to set a time for me to come see it.
I come out and plan
I look at the slab or wall with you, explain which saw fits and why, ask about power for indoor cuts, and leave you with an estimate.
Cut, haul off, walk through
Once you say go, our crew scans, cuts and hauls out the concrete, I check the work along the way, and we walk it together at the end.
Why people call us to cut concrete
I learned this trade under a boss who made me redo work until it was right, and I still run jobs that way. On a cut, that means finding out what's in the concrete and explaining the plan before I price it.
Explained before it's priced
I want you to understand the job well enough to ask good questions, of us or anyone else bidding it, so I walk you through it first.
Our own crew
The people cutting your slab work for us, the same crew I'd send to pour one, not a team we met that morning.
Satisfaction guaranteed on every job
We go over the finished cut with you on site before we call it done. When you're ready, call (949) 619-8295 or send the form.
Concrete cutting in Lake Forest and nearby cities
We're based in Lake Forest and work across Orange County, including Mission Viejo and Irvine. Permit rules differ from city to city, so we check with the building office where your job is before we start, and if it needs a permit, we handle the application with you.
Cutting concrete makes fine silica dust, and California's silica rule for construction work covers repair, removal and renovation too, so we keep the dust down while we cut. Orange County's older runoff manual lists concrete among materials that can pollute runoff, so we catch the slurry, the gray water off a wet blade, instead of letting it run to the street.
Tell us what needs cutting
Send the cut's location, indoors or out, rough length and slab thickness if you know it. We reply within one business day to set up a free, no-obligation estimate on site.
Call (949) 619-8295Questions about concrete cutting
Do I need a scan before cutting a concrete slab in Lake Forest?
Yes, plan on a scan before any cut. One scanning company advises a check, usually ground penetrating radar, even when drawings exist, because the slab that got built often differs from the plans. We scan before we cut, so if you have drawings, hand them over and we'll compare them with what the scan shows.
Which concrete saw can be used inside my home?
An electric saw, because gas and diesel saws put out exhaust that has nowhere to go in a closed, lived-in space. Electric flat saws need a power hookup on site, so when I come out for the estimate, I'll ask where we can plug in.
How much does concrete cutting cost in Lake Forest, CA?
Professional concrete saw cutting across the US usually costs about $4 to $15 per linear foot, and that's a national figure. Reinforced or deeper slabs cost more per foot than a standard, easy-to-reach slab, so they land toward the high end. For a Lake Forest number, we'll come out and give you an estimate.
Which California license covers concrete sawing and coring?
California's contractor licensing board lists concrete sawing, breaking and coring under its concrete related services contractor class. Ask any crew bidding your cut, us included, whether their license covers this kind of work, and check it with the board.